Memory card recording, U y 4 – JVC GR-D70 EN User Manual

Page 17

Advertising
background image

EN

17

5

1

1024

^

u

y

4

MEMORY CARD RECORDING

Basic Shooting (Snapshot)

You can use your camcorder as a digital still camera for
taking snapshots.

Perform the procedures listed below before continuing.
● Power (

pg. 7)

● Grip Adjustment (

pg. 8)

● Viewfinder Adjustment (

pg. 8)

● Loading A Memory Card (

pg. 11)

● Picture Quality/Image Size Setting (

pg. 11)

1

Set the VIDEO/MEMORY Switch

4

to “MEMORY”,

then set the Power Switch

u

to “

” or “

” while

pressing down the Lock Button

y

located on the

switch. Open the LCD monitor fully or pull out the
viewfinder fully.

2

Press SNAPSHOT

^

. “PHOTO”

y

appears while

the snapshot is being taken.
The image is recorded on the memory card.

• Still images are recorded in the snapshot mode with

no frame.

To Delete Unwanted Still Images . . .

..... when unwanted still images are stored in the

memory card or its memory is full, refer to
“Deleting Files” (

pg. 20) and delete unwanted

still images.

To Remove The Shutter Sound . . .

..... when you do not want to hear the shutter sound,

set “BEEP” to “OFF” in the Menu Screen
(

pg. 30). The sound is no longer heard from the

speaker.

NOTES:

● Even if “DIS” is set to “ON” (

pg. 29), the Stabiliser will

be disabled.

● If Snapshot recording is not possible, “PHOTO”

y

blinks

when SNAPSHOT

^

is pressed.

● If Programme AE with special effects (

pg. 23) is

engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.

● If shooting is not performed for approx. 5 minutes when

the Power Switch

u

is set to “

” or “

” and power is

supplied from the battery pack, the camcorder shuts off
automatically to save power. To perform shooting again,
close the LCD monitor and re-open it. When using the
viewfinder, push back it in and pull it out again.

● The Motor Drive mode (

pg. 25) is disabled when the

VIDEO/MEMORY Switch

4

is set to “MEMORY”.

● Still images taken are compliant to DCF (Design rule for

Camera File system). They do not have any compatibility
with devices which are not compliant to DCF.

Display

Shooting icon

pg. 50, 51

Image Size

pg. 11

Remaining number of shots

pg. 50, 51

(Approximate Number of
Storable Images

pg. 18)

Picture Quality

pg. 11

Card icon

pg. 50, 51

To Protect Valuable Files (available only for SD
Memory Card) . . .

..... slide the write/erase protection tab on the side

of the memory card in the direction of “LOCK”.
This prevents the memory card from being
recorded over. To record on this memory card,
slide the tab back to the position opposite to
“LOCK” before loading it.

Write/erase
protection tab

01 GR-D70/60EK 17-22

02.12.4, 17:05

17

Advertising
This manual is related to the following products: