Jensen HEAVY DUTY JHD3000 - Manual (Page 5)

- 7- - 8 -
20.SHUFFLE PLAY SELECTOR (SHUF)
During disc play, press this button to play the tracks on the disc in a random
shuffled order (SHUF will appear on the display panel). In Shuffle Play mode,
the TUNE/TRK + / - function will also select tracks in random order in-
stead of the normal progression. The Shuffle play mode can be cancelled by
pressing the button again (SHUF indication will disappear from the display p-
anel) or by activating the Repeat Play or Scan functions.
21. REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the play of the selected track (RPT
will appear on the display panel). Play of the track will continue to repeat until
the button is pressed again and the RPT indication disappears from the displ-
ay panel. Repeat Play mode will also be canceled by activating the Scan or Sh-
uffle Play functions.
22.TRACK SCAN SELECTOR (SCAN)
During disc play, press this button to play the first 10 seconds of each track on
the disc (SCAN will appear on the display panel) when a desired track is reac-
hed, press the SCAN button again to cancel the function (SCAN will disappear
from the display panel) and play of the selected track will continue. Scan mode
will also be canceled by activating the Shuffle or Repeat Play functions.
23.EAS CONTROL
In CD mode, a long press of this button will turn the EAS (Electronic Anti-Skip
function) on/off.
24. PROGRAM CD TRACKS CD MEM/P.PLAY/P.CL
During disc play, the programming function can select up to 10 CD tracks to
play in any order. The program works by allowing you to select a track number
for each spot in the playing sequence. To begin programming, select a desired
track number on the disc by using the TUNE TRK +/ - button; this initiates an
up/down scan of the CD tracks. When the desired track is found, press and hold
the P.MEM button until P.1 appears flashing on the display; then press the
button again to lock the chosen track into memory location 1. Repeat this pro-
cedure for each of the other 9 selected tracks in the desired order; P2-9 will
appear on the display. To play the CD tracks in the programmed order, press the
P.PLAY button. The selected track in memory location P.1 will begin play and
P.1 will appear on the display; the remaining programmed tracks on the CD
will follow in the desired order. To clear the programming CD tracks, press the
P.CL button for more than 2 seconds; CLR will appear flashing on the display,
then press P.CL again, CLR will disappear from the display and the program-
med tracks will be erased.
25 MONO/STEREO OPERATION
During FM radio operation , when the signal is broadcast in stereo, the stereo
mode is indicated by the ST indicator on the display panel. If the FM signal
is broadcast in monaural instead of stereo, the stereo indication will disappear;
the stereo indication will also disappear when the signal strength is greatly di-
minished,or when a station on either AM band is selected.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS