Press fm or am to select the band, Press fm/am to select the band, Selecting the fm reception mode – JVC LVT1007-010A[A] User Manual

Page 24: While listening to an fm station, press fm mode

Advertising
background image

22

To tune in a preset station

On the front panel:

1. Press FM or AM to select the band.

The last received station of the selected band is tuned in.

2. Press FM/AM PRESET

5 or until you find the

channel you want.

• Pressing FM/AM PRESET

5 increases the number.

• Pressing FM/AM PRESET

∞ decreases the number.

From the remote control:

1. Press FM/AM to select the band.

The last received station of the selected band is tuned in.

• Each time you press the button, the band alternates between

FM and AM.

2. Press the 10 keys to select a preset channel

number.

• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10/0.
• For channel number 30, press +10, +10, then 10/0.

Note:

When you use the 10 keys on the remote control, be sure that they
are activated for the tuner, not for the CD and others. (See page 42.)

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station (see

page 21).

While listening to an FM station, press FM MODE.

• Each time you press the button, the FM reception mode alternates

between “AUTOMUTING” and “MODE MONO.”

AUTOMUTING: Normally select this.

When a program is broadcasted in stereo,
you will hear stereo sound;
when in monaural, you will hear monaural
sounds.
This mode is also useful to suppress static
noise between stations. The AUTO
MUTING indicator lights up on the display.
(Initial setting)

MODE MONO:

Select this to improve the reception (but
stereo effect will be lost).
In this mode, you will hear noise while
tuning into the stations. The AUTO
MUTING indicator goes off from the
display. (The STEREO indicator also goes
off.)

Note:

When you use the FM MODE on the remote control, be sure that it is
activated for the tuner, not for the CD and others. (See page 42.)

RX-7032V

AUDIO/VIDEO CONTROL RECEIVER

RX-7032V

AUDIO/VIDEO CONTROL RECEIVER

VOLUME

AUTO MUTING

TUNED STEREO

LINEAR PCM

L

SUBWFR

R

ANALOG

SPEAKERS 1

VOLUME

TUNED

LINEAR PCM

L

SUBWFR

R

ANALOG

SPEAKERS 1

21-22_7032[A]3.pm6

03.5.12, 7:02 PM

22

Advertising
This manual is related to the following products: