JVC LVT1007-010A[A] - Manual (Page 39)

37
VOLUME
LINEAR PCM
DIGITAL
L
SUBWFR
LS RS
C R
LFE
DIGITAL AUTO
DSP SPEAKERS 1
All Channel Stereo mode
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers. This mode cannot be used
without activating the surround speakers.
• If the front speakers are deactivated, “All Channel Stereo”
cannot be selected.
Monaural Film
In order to reproduce a more acoustic sound field in your listening
room while viewing monaural sound video software (analog and 2-
channel digital signals), you can use this mode.
The surround effect will be added, and the sound localization of
actor’s words will be improved. This mode cannot be used for
multi-channel digital signals.
When “MONO FILM” is used, sounds come out of all the connected
(and activated) speakers.
• If incoming signals change from 2-channel digital signal to
another digital signal type, “MONO FILM” is canceled and an
appropriate Surround mode is activated.
Activating the DSP Modes
Activating one of the DSP modes for a source automatically
recalls the memorized settings and adjustments (see pages 23 to
31.)
You can also use the buttons on the remote control for the same
functions.
1. Select and play any sound source.
2. Press DSP repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP modes change as
follows:
= HALL 1 = HALL 2 = LIVE CLUB
= DANCE CLUB = PAVILION = ALL STEREO*
= THEATER 1 = THEATER 2 = MONO FILM**
= (Back to the beginning)
* When surround speakers are set to “NONE,” you cannot
select “ALL STEREO.”
** When multi-channel signals come in, you cannot select
“MONO FILM.”
Note:
When the surround speakers are deactivated, the 3D-PHONIC
processing is applied to the DSP modes (the 3D-PHONIC indicator
also lights up).
To cancel the DSP modes
Press SURROUND/DSP OFF (or SURR/DSP OFF on the remote
control). “SURR OFF” appears on the display.
• When the front speakers are deactivated, “HEADPHONE” will
appear.
Sound reproduced from normal stereo
Sound reproduced from All Channel Stereo mode
RX-7032V AUDIO/VIDEO CONTROL RECEIVER
32-38_87032[A]3.pm6 03.5.12, 7:02 PM 37