JVC LVT1139-002A - Manual (Page 11)

11
TAPE OPERATIONS
Listening to a tape
You can play back type I (normal) tapes.
1
Insert a cassette into the cassette
compartment.
The unit turns on and tape play starts
automatically (“LOADING” flashes on the
display).
When one side of the tape reaches its end
during play, the other side of the tape
automatically starts playing. (Auto Reverse)
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, pressing TAPE (PROG) turns on
the unit and starts tape play automatically.
2
Select the tape direction.
Each time you press the button,
the tape direction changes
alternately.
To stop play and eject the cassette
Press Tape 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment (“EJECT”
flashes on the display).
Notes:
• If you change the source, the tape play also stops
(without ejecting the cassette this time).
• You can also eject the cassette by pressing Tape
0
with the ignition key turned off. (However, you
cannot load the cassette into the cassette
compartment when the ignition key is turned off.)
ENGLISH