JVC LVT1139-002A - Manual (Page 14)

14
SOUND ADJUSTMENTS
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the button,
the adjustable items change as
follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
|
+06 (max.)
TRE Adjust the treble. –06 (min.)
|
+06 (max.)
FAD* 1 Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
VOL* 2 Adjust the volume. 00 (min.)
|
50 (max.)
* 1 If you are using a two-speaker system, set the fader
level to “00.”
* 2 Normally the control dial works for volume
adjustment. So you do not have to select “VOL” to
adjust the volume level.
2
Adjust the level.
Ex.: When you adjust “TRE” (treble)
3
Repeat steps 1 and 2 to adjust the
other items.
While listening at a low volume level:
You can boost low and high frequencies to
produce a well-balanced sound at low volume
level.
Press LOUD so that “LOUD”
appears on the display.
Each time you press the button,
the loudness mode turns on and
off alternately.
When the loudness mode is turned on, the
LOUD indicator lights up on the display.
To increase the level
To decrease the level
LOUD indicator
ENGLISH