GE 99003 GE Bluetooth Advanced Stereo Headphone - Manual (Page 10)

10
A2DP (Advanced Audio Distribution Profi le). The GE 99001 Portable
Transmitter only supports A2DP so the music will be muted during
the phone call.
Switching Between Audio and Phone Calls
Setting Up / Prerequisite
Using your Bluetooth-enabled phone’s menu, confi rm that the GE
99003 headphones have been added to the “Paired Device” list and
connected to your phone. Note: If you haven’t already paired the
headset with the Bluetooth-enabled phone, refer to the section
“Pairing the headset to a phone for the fi rst time.”
Making the Switch
1. Make sure that both your phone and mobile audio device are
paired with the headphones, and that you paired the
phone
fi rst.
2. Depending upon your phone brand, when you receive a call,
the headphones may automatically mute the music and switch
to the phone mode – just start talking. If you hear the phone
ring, press the play/pause/phone button on the headphones
to answer. End a call by pressing the same button again, or
wait for the caller to hang up. Music from the audio source will
resume when the caller disconnects.
FAQs
1. How can I tell if the headphone’s battery has low power?
The battery power is almost exhausted when one or more of the
following scenarios occur:
a. The headphones start to reset automatically.
b. You can constantly hear breaks on the audio link about
every 30 seconds.
c. Headphones will not connect to any Bluetooth
® enabled device.