Picture in picture (pip) operation, Sound setting – JVC AV-29Q317B User Manual
Page 11
11
FUNCTIONS
Sound setting
MaxxBass
You can enjoy an enhanced bass sound which cannot be played by
normal speakers.
OFF
MaxxBass is turned off.
HIGH
MaxxBass effect is high.
LOW
MaxxBass effect is low.
You can also operate this function from the menu.
SOUND menu
MENU
MaxxBass
"MaxxBass" is a registered trademark of Waves Audio Ltd. in the USA,
Japan and other countries.
CINEMA SURROUND
You can enjoy an enhanced sound for wider audience.
OFF
Cancel the function.
ON
Listen to sound with wider audience effect.
You can also operate this function from the menu.
SOUND menu
MENU
CINEMA SURROUND
EQUALIZER
You can adjust the sound level of each frequencies when selecting USER
mode in SOUND MODE.
1
SOUND menu
MENU
SOUND MODE
USER
2
SOUND menu
MENU
EQUALIZER
3
Select and adjust the desired frequencies.
Adjust high frequency will affect higher pitch sound and vice versa.
When CINEMA SURROUND set to ON, you cannot adjust EQUALIZER
(
\ page 8).
Picture in picture (PIP) operation
You can display a sub picture within the main picture on the screen.
to display the sub picture.
You can hear the sound from the main picture only.
When main picture and sub picture are the same TV channel:
Press SUB-P -/+
Main picture will be changed TV channel follow as sub
picture.
Press
(Input)
To change sub picture to video mode.
Press CHANNEL -/+
Sub picture will be changed TV channel follow as Main
picture.
Press CHANNEL -/+
Until main picture change to video mode.
To cancel, press the PIP button again.
While a sub picture is being displayed, you can perform the following
functions.
(SUB-P)
Select the desired TV channel for sub picture.
(Input)
Select the input source for the sub picture.
(Swap)
Swap between the main picture and sub picture.
(Position)
Change the sub picture position.
lower right
→ lower left
upper right
→ upper left
(Freeze)
Freeze the sub picture.
When VIDEO-2 is set to component, you cannot select VIDEO-2 for sub
picture.
When VIDEO-2 is set to component and if the input source of the main
picture is set to VIDEO-2 with component, PIP button is disabled and sub
picture cannot be displayed.
)))
)))
)
)))
)))
)))
)))
)))
)
)))
)))
))
+
+
+
%15!,):%2
)))
)))
)))
)))
)))
)
GGT0158-001A-E-EN.indd 11
GGT0158-001A-E-EN.indd 11
05-06-07 09:29:42
05-06-07 09:29:42