Troubleshooting – JVC AV-29Q317B User Manual

Page 17

Advertising
background image

17

REFERENCE

Troubleshooting

If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.

Problem

Cause / Solution

Page

No picture, no sound

• Deactivate the BLUE BACK function if it is

turned on.

• Choose the appropriate sound system. Refer

to “SOUND SYSTEM”.

10

12

Snowy picture

• Check the aerial cable and TV connections.

4

Stripes appear on the
picture

• Interference caused by devices such as an

amplifier, personal computer, or a hair drier.
Move it away from your TV.

–

Double-pictures
(ghosting) occur

• Interference occurs caused by signal reflecting

from mountains or building. Try to adjust the
aerial’s direction or use another antenna.

–

Poor picture

• Choose the appropriate colour system. Refer

to “COLOUR SYSTEM”.

• Adjust the COLOUR or BRIGHT setting. Refer

to “PICTURE SETTING”.

9

10

White and bright still
image look as if it was
coloured

• Inevitable phenomenon due to the nature of

the picture tube. This is not a malfunction.

–

Top of the image from
software products or
video tape is distorted

• Due to the condition of the video signal, the

image was not properly recorded. This is not
a malfunction.

–

Poor sound

• Adjust the sound frequency properly. Refer to

“SOUND SYSTEM”.

12

Cannot operate the
remote control

• The batteries may be exhausted. Replace with

new batteries.

• Ensure that you are operating the remote

control at less than seven meters from the
front of your TV.

6

Cannot operate the
menus

• Press TV/VIDEO button to return to TV mode

and try operating the menus.

–

Cannot operate the
front control buttons

• Deactivate the CHILD LOCK function if it is

turned on.

14

Problem

Cause / Solution

Page

Colour patches appear
at the corner of the
screen

• This maybe due to magnetized device such

as a speaker placed near to your TV. Move it
away from your TV. Alternatively, you can also
use the magnetic shielded speaker.

–

Picture is tilted

• This maybe due to the earth magnetism. Refer

to “PICTURE TILT” to correct the tilt.

10

Image takes a short
period to be displayed

• Image required time to stabilize before display.

This is not a malfunction.

–

TV may emit crackling
sound

• This is due to a sudden change in temperature

and it is not a malfunction. If the crackling
sound is too frequent, request your service
technician for inspection.

–

Feel a slight electric
shock when touching
the TV screen

• This is due to the static electricity of the

picture tube and it will not harm the human
body. This is not a malfunction.

–

AUTO SIGNAL DETECT
does not work

• Set the AUTO SIGNAL DETECT function to

ON.

• Turn the VCR or DVD Player off and on again.
• Check that the video cable connection on

VIDEO-2 is properly connected.

13

–
–

Suddenly, the TV input
changes to VIDEO-2

• Check whether the AUTO SIGNAL DETECT

function is on or off.

• AUTO SIGNAL DETECT function may work

when you operate the VCR or DVD player
even if you do not make it to playback.

13

–

AUTO SIGNAL DETECT
does not work correctly

• Check the video cable connection.
• Some VCR or DVD player may output the

video signal discontinuously. If this happens,
AUTO SIGNAL DETECT function cannot work
correctly.

–
–

“PLEASE DISCONNECT
VIDEO-1 CABLE!”
appears on the screen.

• Please disconnect either S-VIDEO cable or

video input cable from video-1 input.

–

GGT0158-001A-E-EN.indd 17

GGT0158-001A-E-EN.indd 17

05-06-07 09:29:48

05-06-07 09:29:48

Advertising