JVC GM-F520S - Manual (Page 5)

3
4
5 e
r
t
6
7
8
9
p
q
w
1
2
5
Inserting the batteries
Use two AA/R6 dry cell batteries.
Insert the batteries from the
· end, making sure the ª and · polarities are
correct.
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on how much you use
the remote control.
• The batteries we supply are only for setting up and testing your monitor,
please replace them as soon as you need to.
• If the remote control does not work properly, replace the batteries.
Parts Identification
1 POWER ON button
Turns on the monitor.
2 POWER OFF button
Turns off the monitor (on standby).
3 INPUT SELECT buttons (see page 10)
Select the input.
4 Number buttons
5 MENU/EXIT button (see page 12)
• Displays the main menu.
• Exits the menu operation.
6 5∞2 3 buttons (see page 12)
Selects or adjusts the items on the menu.
OK button (see pages 11, 17)
Confirm the numbers entered.
7 ID buttons (see page 11)
Activates/deactivates the ID control of the monitor.
8 DISPLAY button (see page 11)
Displays the information of the current input.
9 ASPECT button (see page 10)
Changes the aspect ratio.
p SET-UP button (see page 12)
Displays the set-up menu.
q PICTURE button (see page 11)
Changes the picture mode.
w DUAL DISPLAY buttons (see page 11)
Activates/deactivates display using dual-monitor.
e CLEAR button (see page 17)
Cancels the numbers entered.
r VOLUME +/– buttons
Adjusts the volume level.
t Muting button (see page 10)
Turns off the volume immediately.
Remote control
Monitor
Rear panel
1 Remote sensor
Aim the remote control toward the sensor.
2 Self-diagnostic lamps (see page 27)
Light or flash when a malfunction occurs on the
monitor.
3 Power lamp
Off: main power is turned off.
Green: power is on.
Orange: power is off (on standby).
4 SET-UP MENU button (see page 15)
Displays the set-up menu.
5 5∞2 3 buttons (see page 12)
Selects or adjusts the items on the menu.
6 MENU button (see page 12)
• Displays the main menu.
• Exits the menu operation.
7 INPUT SELECT buttons (see page 10)
Selects the input.
8 button (see page 10)
Turns on/off the monitor.
9 VOLUME +/– buttons (see page 10)
Adjusts the volume level.
p POWER (main power) switch
| : Main power on (You can turn on/off the monitor
by using
button on the monitor or POWER
ON/OFF buttons on the remote control.)
‡: Main power off
The illustration of the monitor used for explanation
in this manual is of GM-F470S.
Front panel
5 4 6 7 8
9
p
1 2 3
• See page 28 for checking the accessory included with the monitor.
GM-F520S_EN.indd 5 GM-F520S_EN.indd 5 09.2.16 5:05:00 PM 09.2.16 5:05:00 PM