Jabra BT2080 - Manual (Page 11)

8
english
Jabra bt2080
tRoUBLesHootInG & FAQ
I hear crackling noises
- bluetooth is a radio technology, which means it is sensitive to
objects between the headset and the connected device . It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc .) .
I cannot hear anything in my headset
- Increase the volume in the headset .
- Ensure that the headset is paired to the device that you wish to use .
- make sure your phone is connected to the headset by tapping
the answer/End button . See the Jabra StatusDisplay™ .
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone .
Follow the pairing instructions .
I want to reset the headset
It is possible to reset and test the headset by ’Press and hold’ the
volume down and answer/end buttons at the same time . In the
StatusDisplay tm the battery icon and bluetooth icon will flash 5 times
simultaneously . In this mode, the pairing list is reset, and you can
test if the headset works as you will be able to hear audio in the
speaker from the microphone .
the headset will automatically turn off after approx . 10 seconds .
the next time you power on, the headset will go into pairing
mode as the first time you powered your new bt2080 on .
Will the Jabra BT2080 work with other Bluetooth equipment?
- the Jabra bt2080 is designed to work with bluetooth mobile
phones . It can also work with other bluetooth devices that are
compliant with bluetooth version 1 .1 or higher and support a
headset and /or hands-free profile .
I cannot use Reject call, call on hold, Redial or voice dialling
these features are dependent on the ability of your phone to
support a hands-free profile . Even if the hands-free profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices . Please consult
your device manual for details .