Jabra BT2080 - Manual (Page 24)

5
english
Jabra bt2080
2 Set your Bluetooth phone to ‘discover’ the Jabra BT2080
- Follow your phone’s instruction guide . First make sure that
bluetooth is activated on your mobile phone . then set your
phone to discover new devices . this usually involves going
to a ‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a bluetooth device .*
3 Your phone will find the Jabra BT2080
- Your phone will find the headset under name “Jabra bt2080” .
Your phone then asks if you want to pair with the headset .
accept by pressing ‘Yes’ or ‘OK’ on the phone . You may be asked
to confirm with a passkey or PIN . then use 0000 (4 zeros) . Your
phone will confirm when pairing is complete and the bluetooth
status indication on the StatusDisplay™ will shift from flashing
light to steady light .
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra BT2080
Jabra BT2080
OK
Passkey:
****
HANDSFREE
SELECT
Jabra BT2080
added.
The handsfree is
now ready for use
SELECT
Manual pairing mode
If you wish to use the headset with a different phone, or if the
pairing process was interrupted, you can manually set the headset
to pairing mode .
make sure the headset is on . Press and hold the answer/end
button for approximately 5 seconds until the bluetooth icon turns
from a steady light to a flashing light . then repeat steps 2 and 3 in
the above pairing guide .
ConneCtInG WItH YoUR PHone
Pairing is only needed the first time a headset and phone are
used together . When the headset and phone have been paired
once, they will automatically connect when the headset is on and
bluetooth is activated on the phone . the headset can be used
when it is “connected” to the phone . If the devices are paired, but
do not immediately connect, tap the answer/end button . When
your headset is connected the bluetooth connection icon in the
StatusDisplay™ will be constant on for 3 seconds .
* Phone dependent