Nokia 6255 - Manual (Page 67)

S e t t i n g s ( M e n u 7 )
57
■ Call settings
Anykey answer
Anykey answer allows you to answer
an incoming call by briefly pressing
any key except the Power key, Right
selection key, or End key.
At the standby mode screen, select
Menu > Settings > Call settings >
Anykey answer > On or Off .
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in
a fast busy signal when you dial.
With automatic redial activated,
your phone redials the number
(number of times is specified by the
network), and notifies you once the
network is available.
At the standby mode screen, select
Menu > Settings > Call settings >
Automatic redial > On or Off .
Speed dialling
You can activate or deactivate speed
dialling. At the standby mode screen,
select
Menu > Settings > Call
settings > Speed dialling > On or Off .
For more information on entering
speed dialling numbers, see
”Set up
speed dialling” on page 38 .
Answer when fold is opened
Set your phone to answer a call
when you open the fold. If the
setting is off, you must press the Call
key after you open the fold.
At the standby mode screen, select
Menu > Settings > Call settings >
Automatic service update > On or
Off .
Calling card
If you use a calling card for long
distance calls, you can save the
calling card numbers in your phone.
Your phone can store up to four
calling cards.
Note: Contact your calling
card company for more
information.
Save information
1. At the standby mode screen,
select Menu > Settings > Call
settings > Calling card .
2. Enter your security code, and
press OK . See ”Security settings”
on page 63 for more information.
3. Scroll to one of the four card
memory locations, and select
Options > Edit > OK > Dialling
sequence .
4. Select one of the following
sequence types:
Copyright © 2005 Nokia. All rights reserved.