Nokia 6255 - Manual (Page 77)

S e t t i n g s ( M e n u 7 )
67
Activate
Note: This is a network
service. All options listed may
not appear in the display.
Contact your wireless provider
for more information.
1. At the standby mode screen,
select Menu > Settings >
Network services > Call divert .
2. Select one of the following options:
Divert all calls — Divert all calls to
the number you specify.
Divert if busy — Divert incoming
calls when you are in a call.
Divert if not answered — Divert
incoming calls to another
number if you are unable to
answer. You can set a delay
before diverting takes place.
Divert if out of reach — Divert
incoming calls when your phone
is off.
Cancel all diverts — Cancel any
call diverting options you have
set.
3. Select Activate .
4. Scroll to the destination to which
your calls will be diverted, and
press
Select .
5. Enter the number to which your
calls, data, or other information
will be diverted, and press
OK .
Cancel
At the standby mode screen, select
Menu > Settings > Network services >
Call divert > Cancel all diverts .
Note: Cancel all diverts may
affect your ability to receive
voice mail messages. Contact
your wireless provider for
specific details.
Call waiting
If your wireless provider supports
this feature, call waiting notifies you
of an incoming call even while you
are in a call. You can then accept,
reject, or ignore the incoming call.
1. At the standby mode screen,
select Menu > Settings >
Network services > Call waiting >
Activate or Cancel .
2. During a call, press Answer or the
Call key to answer the waiting call.
The first call is put on hold.
3. Press the End key to end the
active call.
Send own caller ID when
calling
If your wireless service provider
supports this feature, then you can
prevent your number from appearing
on the receiving party’s caller ID.
Copyright © 2005 Nokia. All rights reserved.