Creating your own sound mode — manual mode – JVC Model MX-J70J User Manual

Page 15

Advertising
background image

– 12 –

While using one of the surround modes

You can adjust the rear speaker output level if the rear
speakers are connected. Once you adjust the rear speaker
output level for each surround mode, the adjusted level is
stored in memory.
• You cannot adjust the right and left rear speaker levels

separately.

On the remote control ONLY:

1

Press and hold SHIFT.

2

Press REAR LEVEL – / + button.

• Pressing REAR LEVEL – decreases the

output level (from +10 to –10).

• Pressing REAR LEVEL + increases the

output level (from –10 to +10).

3

Release SHIFT.

Creating Your Own Sound Mode — Manual
Mode

You can change SEA pattern to suit your preference. These
changed settings can be stored in the MANUAL 1, 2, and 3
modes.
• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1
again.

If you want to add the surround elements in your SEA

pattern, select one of the surround modes (D.CLUB,
HALL, or STADIUM) before starting the procedure below.

On the unit ONLY:

1

Press and hold SEA CONTROL until
“SEA CONT” appears on the display.

2

Adjust the SEA pattern.

1) Press

4 or ¢ to select the

frequency range to adjust
(LOW, MID, HIGH).

2) Press

1 or ¡ to adjust the

level (–3 to +3) of the selected
frequency range.

3) Repeat steps 1) and 2) to adjust the level of

the other frequency ranges.

3

Press SEA CONTROL again.

4

Press

4 or ¢ to select one of the

MANUAL 1, 2, and 3 modes into which you
want to store the SEA pattern.

5

Press SEA CONTROL again.

The SOUND MODE indicator also lights up.
The SEA pattern you have created are stored into the
MANUAL mode selected in the above step.

To use your own sound mode

Select MANUAL 1, 2, or 3 mode when using the sound
modes. See “Selecting the Sound Modes.”

If you have stored your MANUAL 1, 2, and 3 modes
with the surround elements

You can also adjust the rear speaker output level. See “While using
one of the surround modes.”

SET

SEA CONTROL

PRESET

TUNING

SOUND MODE

SET

SEA CONTROL

SET

SEA CONTROL

Current level appears.

SHIFT

REAR

LEVEL

+

EN01-13.MX-J70[J]/f

99.2.9, 1:31 PM

12

Advertising