JVC KD-DV5400 - Manual (Page 28)

ENGLISH
28
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 29.
1
Enter the PSM settings.
2
Select a PSM item.
General settings — PSM
Indications Item
( : Initial) Setting, [reference page]
DEMO
Display
demonstration • DEMO ON
• DEMO OFF
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [7].
: Cancels.
CLOCK DISP * 1
Clock display
• CLOCK ON
• CLOCK OFF
: The clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [7].
CLOCK HOUR
Hour adjustment 1 – 12 [Initial: 1 (1:00)], [7].
CLOCK MIN
Minute adjustment 00 – 59 [Initial: 00 (1:00)], [7].
CLOCK ADJ * 2
Clock adjustment
• AUTO
• OFF
: The built-in clock is automatically adjusted using the clock data
provided via the satellite radio channel.
: Cancels.
TIME ZONE * 2, * 3
Time zone
— : Select your residential area from one of the time zones for clock
adjustment.
EASTERN, ATLANTIC, NEWFOUND, ALASKA, PACIFIC, MOUNTAIN,
CENTRAL
EN26-31_KD-ADV5490[J]1.indd 28 EN26-31_KD-ADV5490[J]1.indd 28 10/17/07 4:24:04 PM 10/17/07 4:24:04 PM