JVC KD-DV5400 - Manual (Page 41)

ENGLISH
41 REFERENCES
Symptom Remedy/Cause
Satellite radio
• “NO CH” appears on the display for about
5 seconds, then returns to the previous
display while listening to the SIRIUS Satellite
radio.
No broadcast on the selected channel.
Select another channel or continue listening to the
previous channel.
• “NO (information)*” scrolls on the display
while listening to the SIRIUS Satellite radio.
• “---” appears on the display while listening to
the XM Satellite radio.
No text information for the selected channel.
• “---” appears on the display for about
2 seconds, then returns to the previous
channel while listening to the XM Satellite
radio.
Selected channel is no longer available or is
unauthorized.
Select another channel or continue listening to the
previous channel.
• “OFF AIR” appears on the display while
listening to the XM Satellite radio.
Selected channel is not broadcasting at this time.
Select another channel or continue listening to the
previous channel.
• “LOADING” appears on the display while
listening to the XM Satellite radio.
The unit is loading the channel information and audio.
Text information are temporarily unavailable.
• “RESET 8” appears on the display.
• Satellite radio does not work at all. Reconnect this unit and the satellite radio correctly and
reset this unit.
iPod
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• Charge the battery.
• Update the firmware version.
• The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
• “NO IPOD” appears on the display. • Check the connecting cable and its connection.
• Charge the battery.
• Playback stops. The headphones are disconnected during playback.
Restart the playback operation (see page 25).
• No sound can be heard when connecting an
iPod nano.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
• “NO FILES” appears on the display. No tracks are stored. Import tracks to the iPod.
• “RESET 1” – “RESET 7” appears on the display. Disconnect the adapter from both this unit and iPod.
Then, connect it again.
• “RESET 8” appears on the display. Check the connection between the adapter and this
unit.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
EN38-43_KD-ADV5490[J]1.indd 41 EN38-43_KD-ADV5490[J]1.indd 41 10/17/07 4:23:53 PM 10/17/07 4:23:53 PM