JVC KD-AR870 - Manual (Page 42)

42
ENGLISH
Symptoms Remedies/Causes
USB memory playback
• “Read Failed” appears on the display,
then returns to the previous source.
• The attached USB memory may be
malfunctioning, or may not have been
formatted correctly.
The files included in the USB memory are
corrupted.
• Do not pull out or attach the USB memory
repeatedly while “File Check” appears on the
display.
• Correct characters are not displayed
(e.g. album name).
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of
symbols (see page 38).
• While playing a track, sound is
sometimes interrupted.
MP3/WMA tracks have not been properly copied
into the USB memory.
Copy MP3/WMA tracks again into the USB
memory, and try again.
CD changer
• “No Disc” appears on the display. Insert a disc into the magazine.
• “No Magazine” appears on the
display.
Insert the magazine.
• “Reset 08” appears on the display. Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
• “Reset 01” – “Reset 07” appears on
the display.
Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
PICT—PSM
• Download does not seem to finish. It takes quite a long time to download an
animation with many frames (see page 37).
• Animation does not move.
• The display graphic function does
not work correctly.
Wait until the operating temperature resumes.
• You cannot select an image or
animation for “Set” in “Pict.”
(“Default” cannot be changed for
“Movie” and “Picture, ” or beeps
sound for “Slideshow.”)
Select an image only after downloading the
appropriate files in memory.
EN36-45KD-AR870G820[J]1.indd 42 EN36-45KD-AR870G820[J]1.indd 42 5/12/05 6:04:38 pm 5/12/05 6:04:38 pm