JVC KD-AR870 - Manual (Page 8)

8
ENGLISH
To check the current clock time when the
power is turned off
Changing the display pattern
Ex.: When tuner is selected as the source
Source operation display
“SMALL” (CD jacket image) graphic* 1 is displayed.
“LARGE” (full display size) graphic* 1 is displayed.
Audio level meter is displayed (see “LevelMeter” on page 19).
Goes back to the initial display pattern.
* 1 You can use your edited file for graphic screen
(see pages 22 – 25).
Depending on a downloaded file, it may take
a longer time to show it on the display.
* 2 The information bar will disappear if no
operation is performed for five seconds.
To drop the volume in a moment (ATT)
To restore the sound, press it
again.
To turn off the power
Basic settings
• See also “General settings — PSM” on pages
18 – 21.
1
2
-1 Canceling the display
demonstrations
Turn the control dial to set “Demo/Link”
to “Off.”
2
-2 Setting the clock
1 Press number button 4 ( ).
“Clock Hr” (hour) appears. Then,
turn the control dial to adjust the
hour.
2 Press ¢ to select “Clock Min”
(minute). Then, turn the control
dial to adjust the minute.
3 Press ¢ to select “24H/12H.”
Then, turn the control dial to select
“12Hours” or “24Hours,” time
display mode.
3
Exit from the setting.
* 2
EN08-15KD-AR870G820[J]f.indd 8 EN08-15KD-AR870G820[J]f.indd 8 20/12/05 3:44:53 pm 20/12/05 3:44:53 pm