JAI CV-S3200 - Manual (Page 10)

10
CV-S3200/3300
Up switch
Function switch
Down switch
f ) Gamma
This function is to set the gamma correction.
0.45
0.6
1.0
Correction
Correction
Linear
:
:
:
Note : Factory pre-set is 0.45.
g) Scanning reversal (mirror-effect mode)
This function can change the horizontal scanning between normal and reverse.
OFF
ON
Normal scanning
Reversal scanning
:
:
Note : Factory pre-set is set at OFF.
h) Field integration
The sensitivity can be set at these pre-set positions.
OFF
2F
4F
8F
16F
32F
64F
Standard sensitivity (Exposure time = 1 field)
2 times higher than standard sensitivity (Exposure time = 2 fields)
4 times higher than standard sensitivity (Exposure time = 4 fields)
8 times higher than standard sensitivity (Exposure time = 8 fields)
16 times higher than standard sensitivity (Exposure time = 16 fields)
32 times higher than standard sensitivity (Exposure time = 32 fields)
64 times higher than standard sensitivity (Exposure time =64 fields)
:
:
:
:
:
:
:
Note : Factory pre-set is OFF.
Screen display (example)
5-2-2. Operations
White balance Manual
Function buttons for on-screen-menu
Rear panel of CV-S3300 (example)
Red Blue
Note : This scroll bar will be displayed when the following
functions are selected.
White balance = manual, AGC = manual, Iris = manual