JAI CV-S3200 - Manual (Page 11)

CV-S3200/3300
11
To start adjustment, push the “FUNC” button. The menu will appear on the monitor .
(See page 12)
Use “UP” or “DOWN” buttons to choose functions. To select function, press the “FUNC”
button.
After selecting the function, press “UP” or “DOWN” buttons to choose mode. To select
mode, press the “FUNC” button.
To use One Push White Balance.
Go to the next function if needed, and repeat (b) to (c).
1. Change to White Balance mode by Function SW.
2. Change to One-push mode by Up or Down SW.
3. Push Function SW and make it READY.
4. Push Up SW, and One-Push White Balance function starts.
5. Push Function SW to save the data (R.B.Gain) of One-Push White Balance.
If you turn off the power without saving the data, it will return to the original status.
(a)
(b)
(c)
(d)
5-3. RS 232C functions
White balance
Electronic shutter
Auto gain control
Back light compensation
Iris level
Gamma
Scanning reversal
Frame integration
:
:
:
:
:
:
:
:
To adjust the color temperature
To adjust the shutter speed
OFF, +12dB, +24dB, manual selectable
To create your own BLC pattern.
To adjust the video level
0.45, 0.60, 1.0 selectable
To select the scanning direction
To select the sensivity
a)
b)
c)
d)
e)
f )
g)
h)