JVC Wide LCD Panel TV LT-23B60SJ - Manual (Page 14)

ENGLISH - 13 -
If “FEATURE NOT AVAILABLE” is displayed,
download was not performed correctly. Before
trying to download again, check that:
• The VCR power is turned on.
• The VCR is T-V Link compatible.
• The VCR is connected to the
EXT-2 .
• The scart cable is fully wired.
Direct REC:
You can easily record to VCR the images that
you are watching on the TV. For details, read
the manual for your VCR. Use your VCR con-
trols. You can not carry out Direct REC using
your TV control.
When the VCR is not ready (For example when
there is no tape inserted), “NO RECORDING”
is displayed. In the following situations, the
VCR will stop recording if the TV is turned off,
if the TV channel or input is changed, or if the
menu is displayed on the TV:
• When recording images from an external
device connected to TV (For example
camcorder).
• When recording a TV channel after it has
been unscrambled on a decoder.
• When recording a TV channel by using the
TV’s output because the VCR’s own tuner
can not properly receive that channel.
TV autopower on/VCR image view:
When the VCR starts playing, the TV automati-
cally turns on and images from EXT-2 appear
on the screen.
This function does not happen if your TV’s main
power is turned off. Set your TV’s main power
to on (StandBy Mode).
Operating the TV
You can operate your TV using both the re-
mote control handset and onset buttons.
Volume setting and programme selection can
be made by using the buttons at the control
panel on the right side of the TV.
Operating with the buttons on the
TV
Volume Setting
• Press “ -” button to decrease volume or
“ +” button to increase volume, so a vol-
ume level scale (slider) will be displayed at
the middle of the bottom on the screen.
Programme Selection
• Press “
” button to select the next pro-
gramme or “ ” button to select the previ-
ous programme.
Switching input mode
• Pressing TV/AV/OK button will change the
input mode.
Entering Main Menu
• Press “MENU” button to enter Main menu. In
the Main menu select submenu using
“ ” or “ ” button and enter the sub-
menu using “ -” / “ +” or TV/AV/OK but-
ton. To learn the usage of the menus, refer to
the Menu System sections.
Operating with Remote Control
The remote control handset of your TV is de-
signed to control all the functions of the model
you selected. The functions will be described
in accordance with the menu system of your
TV.
Functions of the menu system are described
in following sections.
Volume Setting
Press “ +” button to increase volume.
Press “ -” button to decrease volume. A
volume level scale (slider) will be displayed in
the middle at the bottom of the screen.
01-ENG-2325W-17MB08P-1861UK-(LT-23B60SJ)_02062005.p65 02.06.2005, 10:56 13