John Lewis JLBIOS603 - Manual (Page 23)

23
If you select a cooking function while the pyrolytic
function is active, the cleaning cycle will be inter-
rupted. If the oven door lock is activated, it is impos-
sible to select any cooking function until the door
lock is off.
2. The Cooking Duration symbol will flash for 5
seconds; during this time push “ “ or “ “ buttons to
select the pyrolytic 1 (P I) or pyrolytic 2 (P 2) function
(Fig. 21).
3. Once you have chosen the desired pyrolytic function (P
I or P 2), the “Pyro” writing will flash in the display waiting
for confirmation to start the pyrolytic cleaning function.
4. To confirm which pyrolytic function you desire, press
the Pyrolytic button. The “Pyro” writing will stop flashing
and the symbol
will disappear, the acoustic signal
will stop, the oven lamp will switch off and the pyrolytic
cleaning cycle starts(Fig. 22).
As soon as the oven heats up, the thermometer symbol
rises slowly , indicating that the temperature inside the
oven is increasing.
5. After some time, the door lock will be activated and the
related symbol will be displayed (Fig. 23). At this
time the Oven functions button is no more active.
At the end of the pyrolytic cleaning process, the display
shows the time . The oven door is locked.
Once the oven has cooled down, an acoustic signal will be
emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, press button
.
NO NO NO NO NOTE: TE: TE: TE: TE: The time indication is inclusive of the cooling down
time.
T T T T To pr o pr o pr o pr o programme the p ogramme the p ogramme the p ogramme the p ogramme the pyr yr yr yr yrol ol ol ol olytic ytic ytic ytic ytic
cleaning cycle (dela cleaning cycle (dela cleaning cycle (dela cleaning cycle (dela cleaning cycle (delayyyyyed star ed star ed star ed star ed start, t, t, t, t, au- au- au- au- au-
tomatic stop) tomatic stop) tomatic stop) tomatic stop) tomatic stop)
If you desire, you can programme the starting and ending
time of the pyrolytic cleaning cycle, however, be aware a
power failure could cause a temperature increase of the
surround or cabinet which could result in a fire.
1. Press button to switch on the oven. Press the
Oven functions button as often as necessary, until the
pyrolytic function symbol (level 1 - P I) appears
in the display.
Simultaneously the “Pyro” writing and the symbol
indicating the shelf supports
will flash in the
display and an acoustic signal will be emitted. This
means that, before activating the pyrolytic cleaning
function, you have to remove the shelf supports and
all the oven accessories (see instructions given in the
previous paragraph).
Fig. 23 Fig. 23 Fig. 23 Fig. 23 Fig. 23
Fig. 21 Fig. 21 Fig. 21 Fig. 21 Fig. 21
Fig. 22 Fig. 22 Fig. 22 Fig. 22 Fig. 22