John Lewis JLBIOS603 - Manual (Page 24)

24
Fig. 24 Fig. 24 Fig. 24 Fig. 24 Fig. 24
2. The Cooking Duration symbol will start flashing;
during this time push “ “ or “ “ buttons to select
the pyrolytic 1 (P I) or pyrolytic 2 (P 2) function.
3. Once you have chosen the desired pyrolytic function,
the “Pyro” writing will flash in the display waiting for
confirmation to start the pyrolytic cleaning function.
At this time, push the Time functions button until the
"End of Cooking" symbol
and the arrow symbol
will flash (Fig. 24). The control panel will display
the end of the cleaning cycle (that is, the actual time
+ cooking duration time).
Push “
“ or “ “ buttons to select the required end
of cycle time (Fig. 24). After a few seconds, the “Pyro”
writing and the symbol
will stop flashing, the
acoustic signal will stop while the Cooking Duration
symbol
will flash until the pyrolytic cleaning cycle
start.
4. After some time, the door lock will be activated and
the related symbol will be displayed.
At the end of the pyrolytic cleaning process, the display
shows the time. The oven door is locked.
Once the oven has cooled down, an acoustic signal will
be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, push
button
.
1