GE 94925 GE Universal Remote - Manual (Page 18)

17
Identifying Codes From Your Universal
Remote
If you need to find the three-digit code for
your TV, VCR, DBS System, Cable Box or
Audio System after your device is set-up,
use this procedure.
1. Press and hold
CODE SEARCH until
the INDICATOR
LIGHT lights,
then release
CODE SEARCH.
2. Press and release
the device button
for the code you
are retrieving. The
INDICATOR LIGHT
will blink once.
NOTE: For AUX
retrieving, press AUX
button followed
by the device button.
3. Press and release
CODE SEARCH.
The INDICATOR
LIGHT will turn off.
4. Starting with 0 on the keypad, press
the number buttons in order (0-9) until the
INDICATOR LIGHT blinks.
5. The number which causes the
INDICATOR LIGHT to blink is the first
digit of your code.
6. Repeat Step 4 until you have retrieved
all three