JVC CA-D672TR - Manual (Page 19)

15
English
33
3
3
Changing the Display ———————————————————————
You can see RDS information on the display.
To view RDS information on the display, press the DISPLAY MODE button. (When using the
Remote Control, press the DISPLAY MODE button after pressing the RDS button.)
Each time you press the button, the display changes to show the following information:
PS (Programme Service):
Station names will be displayed.
PTY (Programme Type):
Types of broadcast programmes will be displayed.
RT (Radio Text):
Text message sent by stations will be displayed.
Station Frequency:
Station frequencies.
❏ While RDS information is being received from a station, “WAIT PS”, “WAIT PTY”, or “WAIT
RT” may appear on the display.
Searching for Programmes by PTY codes ———————————————
One of the advantages of the RDS service is that you can locate a particular kind of programme by
specifying the PTY codes.
❏ The PTY Search function is applicable to preset stations only.
To search for a programme using the PTY codes, follow this procedure:
Using the Unit
1.
Press the PTY SEARCH button.
“PTY” and “SELECT” appear alternately on the display.
Note: If no adjustments are made for 5 seconds in PTY Search mode, the display reverts to the
previous display. Perform the next step while “PTY” and “SELECT” are being displayed.
2.
Press the MULTI CONROL stick to the left or right to select a PTY.
The display changes with each press of the MULTI CONROL stick as shown below:
Moving the MULTI CONTROL stick to the right
=
Ô TRAFFICÔ NEWSÔ INFOÔ POP M Ô ROCK M Ô M.O.R. M Ô LIGHT MÔ CASSICSÔ
OTHER M
Ô AFFAIRSÔ SPORTÔ EDUCATEÔ DRAMAÔ CULTURE Ô
SCIENCE Ô VARIEDÔ
+ Moving the MULTI CONTROL stick to the left
3.
Press the PTY SEARCH button again.
While the search function is running, the selected programme type and “SEARCH” alternate on
the display. The preset number also change.
Using the Remote Control
1.
Press the RDS button.
2.
Press the PTY SEARCH button.
“PTY” and “SELECT” appear alternately on the display.
Note: If no adjustments are made for 5 seconds in PTY Search mode, the display reverts to the
previous display. Perform the next step while “PTY” and “SELECT” are being displayed.
DISPLAY
MODE
RDS
9
DISPLAY MODE
PTY
SEARCH
PTY
SEARCH
RDS
3
PTY SEARCH
EN01-42.CA-D672TR[E]/F 05.3.24, 9:24 PM 15