JVC HR-VCD1 - Manual (Page 22)

22
Karaoke Features (cont’d)
Microphone
Battery compart-
ment cap
MIC select switch
FREQ. screw
How To Use
To use as a wired microphone
Insert the connector cable to the end of the Microphone
as illustrated and turn it clockwise to fix.
Set the MIC select switch to “WD. (Wired)”.
To use as a wireless microphone
Insert the antenna cable to the end of the microphone
as illustrated and turn it clockwise to fix.
Set the MIC select switch to “WL. (Wireless)”.
ATTENTION:
When you are not using the microphone, it is recom-
mended to set the MIC select switch to OFF: otherwise the
batteries will discharge even when not in use.
1
2
1
2
To MIC input terminal 1 or 2
on the front panel.
Installing Batteries
Unscrew and remove the battery
compartment cap. Screw the cap back on. Insert 2 “AA/UM-3”-size batteries
(provided) in the correct directions. 2 3 1
Connector cable or Antenna cable