JBL 510 - Manual (Page 5)

4
Document Number: 995-0012-001 Description: JBL Reference 510 Manual
Using Your JBL Reference 5 10
1. Remove the battery door located on the noise-canceling device.
. Install the AAA battery and then replace the battery door.
3. Set the volume control on your audio device to the lowest level.
4. Place the headphone cups on your ears in accordance with the “L” and “R” markings.
5. Connect the 3.5mm audio outlet to the audio jack located on your entertainment device.
6. To activate the noise-canceling option, slide the switch located on the side of the noise
canceling unit to the “ON” position.
ON
OFF
Push Battery Door
Down and slide