JVC LVT2088-001B - Manual (Page 21)

ENGLISH
21 SETTINGS
Setting menu ( : Initial)
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth device
found first.
AUTO ANSWER
Only for the device being connected for “BT PHONE.”
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for “BT PHONE.”
AUTO: The unit informs you of the arrival of
a message by ringing and displaying
“RCV MESSAGE” (receiving message).
MANUAL: The unit does not inform you of the arrival
of a message.
MIC SETTING (microphone setting)
Only for the device being connected for “BT PHONE.”
Adjust the volume of the microphone connected to the
Bluetooth adapter.
LEVEL 01/02/03
VERSION
The Bluetooth software and hardware versions are
shown.
You can change the settings listed on the right column
according to your preference.
1
Select “BT PHONE” or “BT AUDIO.”
2
Enter the Bluetooth menu.
3
Select “SETTINGS.”
4
Select a setting item.
* 1 Appears only when a Bluetooth phone is
connected.
* 2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message.
5
Change the setting accordingly.
Bluetooth settings
KD-HDR40[J].indb 21 KD-HDR40[J].indb 21 09.11.10 3:41:24 PM 09.11.10 3:41:24 PM