JVC SR-DVM700U - Manual (Page 67)

EN
67
SUBSIDIARY SETTINGS
You can select a desired background from the 18 original
backgrounds or the backgrounds and/or text colors that you have
created (
A pg. 66), and set it as the default background to be used
during finalization ( A pg. 46, 64).
Registering Default Background And Text Color
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AINITIAL SET UPB, then press
G.
3
Press selection keys to select AMENU BACKGROUNDB, then
press G.
4
Press selection keys to select AREGISTERB, then press
ENTER.
● The background selection screen appears. The current
background selected is indicated by a check mark
A B
superimposed on it.
● To return to the previous screen, press RETURN.
5
Press selection keys to select the desired background, then
press ENTER.
● The A B mark is superimposed on the newly selected
background.
● A preview screen of the selected background will be displayed
for approximately 2 seconds.
● The selected background will be used as the default
background for finalization.
6
Press SET UP to return to the normal screen.
NOTE:
When you update the backgrounds/text color or restore the original
backgrounds/text color, the default setting registered in the above
procedures will be cleared.
Previewing the background effect
This unit allows you to preview the effect of the background and/or
text color you have selected before proceeding with finalization.
This preview function is only possible when finalizing a DVD-R/RW
(Video mode) disc.
After selecting a background in step 8 of AFinalize A DVD-R/RW
Disc B (A pg. 64):
A Press selection keys to select APREVIEWB, then press
ENTER.
● A preview screen of the final result of your selected background
will appear.
● To exit the preview screen, press ENTER.
● To preview again, press selection keys to select
ARECONFIRMB, then press ENTER.
B Press selection keys to select AOKB, then press ENTER to
continue with finalization.
C Proceed to perform steps 9 – 11 of AFinalize A DVD-R/RW
Disc B (A pg. 64) to complete finalization.
Setting The Background And Text Color
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
FGDE
ENTER
SET UP
RETURN
DVD TV
Selection Keys