JVC KD-AR7000 - Manual (Page 12)

12
ENGLISH
To tune in FM stations only with strong
signals—LO/DX (Local/Distance-
extreme)
If received signals are weak, you may only hear
noises. By setting LO/DX to “Local,” you can
make this unit detects only stations with
sufficient signal strength while searching FM
stations.
1
While listening to an FM broadcast...
The Main Menu appears on
the display.
2
Move the cursor to “MODE” on the
Main Menu.
3
Enter the FM MODE Menu.
4
Select “LO/DX.”
5
Select “Local.”
DX: To tune in to all receivable stations.
•
indicator lights up.
Local: To tune in to only stations with
sufficient signal strength.
•
indicator lights up.
To exit from the Menu operation, press
MENU again.
When an FM stereo broadcast is hard to
receive:
1
While listening to an FM broadcast...
The Main Menu appears on
the display.
2
Move the cursor to “MODE” on the
Main Menu.
3
Enter the FM MODE Menu.
The last selected item appears (highlighted)
with the current setting.
4
Select “Mono.”
5
Select “On.”
On: Reception improves, but stereo
effect will be lost.
Off: Normally select this.
MENU
OK
BAND
MENU
OK
BAND
To exit from the Menu operation, press
MENU again.
Cursor
Cursor
On
Off
DX
Local
08-14_KD-AR_SHX700[J]f.p65 3/30/04, 2:19 PM 12