JVC KD-AR7000 - Manual (Page 47)

47
ENGLISH
Storing your own sound modes
• If you do not want to store your current
adjustment, but only to apply the adjustment
to the current playback source, press MENU
to go back to the operation screen of the
current source. Adjustment you made remains
effective until you select a sound mode.
○ ○ ○ ○ ○ ○ ○ ○ ○
Sound Adjustment
—Preference Settings
• If you are using a two-speaker system, set the
fader level to “00.”
• Subwoofer out setting takes effect only when
a subwoofer is connected.
• You cannot adjust the input level—Volume
Adjustment—of the FM stations. If the
source is FM, “VolAdjust” will not be
adjusted (“Fix” appears).
○ ○ ○ ○ ○ ○ ○ ○ ○
Graphic Displays
Downloading (or deleting) files
• You can download a file only while selecting
“CD” for the playback source; on the other
hand, you can delete a file while selecting
any source.
• If you have already downloaded an
animation, downloading a new animation
deletes the previously stored animation.
• It takes a long time to download an animation.
– About 10 seconds for a still image (one
frame).
– About 1 minute for an animation of 55
frames.
• If a disc inserted does not include any <jcl>
and <jca> files, beeps sound when you try to
operate the downloading procedure.
• If you try to store a 19th image for picture
screen, “Picture Full” appears and you cannot
start downloading. Delete unwanted files
before downloading.
○ ○ ○ ○ ○ ○ ○ ○ ○
General Settings—PSM
• To set the “PICT” setting as you like,
download the required files before setting. If
“Default” (for “Picture” and “Movie”) and
“No Slide” (for “Slideshow”) cannot be
changed to other options, required files have
not been downloaded.
• “Auto Dimmer” may not work correctly on
some vehicles, particularly on those having a
control dial for dimming. In this case, change
the “Dimmer” setting to any one other than
“Auto.”
• If you change the “Amp Gain” setting from
“HighPower” to “Low Power” while the
volume level is set higher than “30,” the unit
automatically changes the volume level to
“30.”
○ ○ ○ ○ ○ ○ ○ ○ ○
Other Main Functions
Assigning titles to the sources
• When you try to assign a title to a 41st disc or
to a 31st station frequency, “Name Full”
appears and you cannot enter the text entry
mode. Delete unwanted titles before
assignment.
• When the CD changer is connected, you can
assign titles to CDs in the CD changer. These
titles can also be shown on the display if you
insert the CDs in this unit.
44-51_KD-AR_SHX700[J]f.p65 3/30/04, 2:53 PM 47