Getting started, Charge your headset, English – Jabra Easyvoice OTE4 User Manual

Page 5

Advertising
background image

4

english

Jabra EaSYVOICE

- acoustic shock protection
- e-SCO for enhanced audio quality
- 128 bit encryption

GETTING STARTED

Follow these three steps before using your headset:
1. Charge your headset
2. Activate Bluetooth
® on your mobile phone (refer to the manual for

your Mobile phone)

3. Pair your headset to your mobile phone
the Jabra EaSYVOICE is easy to operate . the answer/end button

on the headset performs different functions depending on how

long you press it .

Instruction

Duration of press

tap

Press briefly

Double tap

2 quickly repeated taps

Press

approx: 1 second

Press and hold

approx: 5 seconds

CHARGE YOUR HEADSET

Make sure that your headset is fully charged for two hours before

you start using it . Use the aC power supply to charge from a

power socket . When the battery indicator has a solid red light,

your headset is charging . When the headset is fully charged

the battery indicator turns solid green for five minutes and is

then turned off .
Use only the charger provided in the box - do not use chargers

from any other devices as this may damage your headset .
Please note: the lifetime of the battery will be significantly reduced

if your device is left uncharged for a long period . We therefore

recommend that you recharge your device at least once a month .

Advertising