Jabra Easyvoice OTE4 - Manual (Page 6)

5
english
Jabra EaSYVOICE
TURNING YOUR HEADSET ON AND OFF
- Slide the on/off button towards the symbol “I” to turn the
headset On . When you do so both indicators will flash on the
Jabra StatusDisplay™ .
- Slide the on/off button towards the symbol “O” to turn the
headset off .
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure called
‘pairing’ . by following a few simple steps, a phone can be paired
with a headset in a matter of minutes .
1 Put the headset in pairing mode
- When you turn on your Jabra EaSYVOICE for the first time, the
headset will automatically start up in pairing mode – i .e . it is
discoverable for your phone . When the headset is in pairing
mode the Bluetooth® status indication on the StatusDisplay™ is
flashing .
2 Set your Bluetooth® phone to ‘discover’ the EASYVOICE
- Follow your phone’s instruction guide . First make sure that
Bluetooth® is activated on your mobile phone . then set your
phone to discover new devices . this usually involves going
to a ‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device .*
3 Your phone will find the Jabra EASYVOICE
- Your phone will find the headset under name “Jabra
EaSYVOICE” . Your phone then asks if you want to pair with the
headset . accept by pressing ‘Yes’ or ‘OK’ on the phone . You
may be asked to confirm with a passkey or PIn . then use
0000
(4 zeros) . Your phone will confirm when pairing is complete
and the Bluetooth® status indication on the StatusDisplay™ will
shift from flashing light to steady light and the headset voice
guidance will say “connected” .
* Phone dependent