Playback using the remote control, Installing the battery, Beam effective area (indoor use) – JVC GR-DF540 User Manual

Page 25: Buttons and functions, Pg. 25)

Advertising

VIDEO PLAYBACK

MasterPage: Start_Right

The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(

੬ pg. 26)

Installing The Battery

The remote control uses
one lithium battery
(CR2025).

Pull out the battery

holder by pushing the lock
tab.

Insert the battery in the

holder, and be sure to
have the “+” mark visible.

Slide the holder back in until you hear a click.

Beam Effective Area (indoor use)

When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5 m.

NOTE:

The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.

Buttons And Functions

A Infrared beam transmitting window

● Transmits the beam signal.

The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
B PAUSE Button

● Pauses the tape (੬ pg. 26)

Up Button (

੬ pg. 27)

C SLOW Rewind Button (੬ pg. 26)

D REW Button

● Rewind/Reverse Shuttle Search on a tape

(

੬ pg. 22)