Pg. 39), E 39 – JVC GR-DF540 User Manual

Page 39

Advertising
background image

EN

39

MENUS FOR DETAILED ADJUSTMENT

MasterPage: Start_Right

AD

V

A

N

C

ED

F

E

A

T

UR

ES

MANUAL

The “q MANUAL” settings are effective only
when the Power Switch is set to “M”.
[ ] = Factory-preset

OFF: Disables the function.
[ON

]: To compensate for unstable images

caused by camera-shake, particularly at high
magnification.

NOTES:

● Accurate stabilisation may not be possible if hand

shake is excessive, or depending on the shooting
condition.

● The “

” indicator blinks or goes out if the

Stabiliser cannot be used.

● Switch off this mode when recording with the

camcorder on a tripod.

[OFF]: Disables 5-Second Recording.
5S: Enables 5-Second Recording. (

੬ pg. 43)

Anim.: Allows you to record a few frames only.
By using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.

[OFF]: Disables the function.
ON: When the distance to the subject is less
than 1 m, set “TELE MACRO” to “ON”. You can
shoot a subject as large as possible at a
distance of approx. 50 cm.

NOTE:

Depending on the zoom position, the lens may go out
of focus.

[OFF]: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio.
CINEMA*

: Inserts black bands at the top and

bottom of the screen. The

indicator appears.

During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are
cut and the screen ratio becomes 16:9. When
using this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording
on 4:3 TVs/LCD monitor/viewfinder, black bands
are inserted at the top and bottom of the screen
and the image appears like a letter boxed 16:9
movie.

SQUEEZE*

: For playback on TVs with an

aspect ratio of 16:9. Naturally expands the
image to fit the screen without distortion. The

indicator appears. When using this mode,

refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/
LCD monitor/viewfinder, the image is elongated
vertically.
D.WIDE*

: The

indicator appears. The

zoom range is extended beyond the maximum
optical zoom wide angle range. This mode’s
wide angle setting is equivalent to using a 0.7X
wide conversion lens. Zooming is possible from
0.7X to 10X. This mode is suitable for shooting
in a small room.

* Available only when the VIDEO/MEMORY Switch

is set to “VIDEO”.

[OFF]: Disengages the function.
ON

: Helps cut down on noise created by

wind. The “

” indicator appears. The quality of

the sound will change. This is normal.

SYSTEM

The “s SYSTEM” functions which are set when
the Power Switch is set to “M” are also applied
when the Power Switch is set to “PLAY”.
[ ] = Factory-preset

OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (

੬ pg. 28, 44)

[MELODY]: Instead of a beep, a melody sounds
when any operation is performed. It also
activates the shutter sound effect.
(

੬ pg. 28, 44)

DIS

5S

TELE MACRO

WIDE MODE

WIND CUT

BEEP

GR-DF540PAL.book Page 39 Friday, January 28, 2005 12:05 PM

Advertising