John Deere LPBST-35JD - Manual (Page 12)

Getting Quality Service - 11
GETTING QUALITY SERVICE
Calibration Settings
If the product you are using is not listed in the flow control setting table,
use the this calibration guide to set the flow control. Calibration guide
information is also provided on the hopper decal of the spreader.
Using application information on product package, find the calibration
setting in the following guide and set calibration control lever.
Adjust spread pattern.
Calibration settings have been determined using a 3 MPH pace or 40 ft. of
travel in 9 seconds.
Calibration Guide for Flow Control Settings
Getting Quality Service
John Deere Quality Continues with Quality Service
John Deere provides a process to handle your questions or problems,
should they arise, to ensure that product quality continues with quality
parts and service support.
Follow the steps below to get answers to any questions you may have
about your product.
1. Refer to your attachment and machine operator manuals.
2. In North America or Canada, call John Deere Special Services at 1-
866-218-8622 and provide product serial number (if available) and model
number.
2 3.5 Wal Mart Gardens Kentucky Bluegrass Grass
Seed
8 7 Wal Mart Gardens Kentucky 31 Tall Fescue
4 5.5 Wal Mart Gardens Kentucky 31 Tall Fescue
3.2 3.5 Wal Mart Weed and Feed 28-3-3
a. Flow Control Settings are based on 3 mph forward speed.
b. The products listed are the property of their respective owners, and are
not the property of, nor recommended by, Deere and Company.
lbs/1000 square feet Flow Control Setting
0.5 - 0.9 1
1.0 - 1.4 2
1.5 - 2.4 2.5
2.5 - 3.4 3
3.5 - 3.9 3.5
4.0 - 4.4 4
4.5 - 4.9 4.5
5.0 - 5.9 5
6.0 - 7.4 5.5
7.5 - 8.9 6
9.0 - 10.9 6.5
11.0 - 12.9 7
13.0 - 14.9 7.5
15.0 - 17.9 8
18.0 - 20.9 9
21.0 - 24.5 10
lbs/1000
square
feet Flow
Control
Setting
at 3
mph
a
Materials
b