JVC GET0643-001A - Manual (Page 15)

ENGLISH
15 EXTERNAL DEVICES
Direct dialing:
1 Select “NUMBER.”
2 Select a number.
3 Move to the next (or previous) number
position.
4 Repeat steps 2 and 3 until you finish
entering the phone number.
5
Voice dialing:
1 Select “VOICE DIAL.”
“SAY NAME” appears on the display.
2 Speak the name you want to call.
• If your cellular phone does not support the
voice recognition system, “ERROR” appears
on the display.
• Using “VOICE DIAL” may be difficult in a
noisy environment or during an emergency.
Using the Bluetooth audio
player
Select “BT-AUDIO.”
If playback does not start, operate
the Bluetooth audio player to start
playback.
• Operate the Bluetooth audio
player to pause (if playback does
not pause when you change the
source).
Reverse skip/forward skip
Pause/start playback*
Enter the Bluetooth menu (see
page 25)
* Operation may be different according to the connected
Bluetooth audio player.
• Refer also to page 13 for connecting/disconnecting/
deleting a registered device.
• If the sound is stopped or interrupted while using a
Bluetooth device, turn off, and turn on the unit again
to restore the sound.
If this does not work, reconnect the device (see page
13).
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only)
EN12-19_KD-S36[J]_1.indd 15 EN12-19_KD-S36[J]_1.indd 15 8/7/09 1:51:14 PM 8/7/09 1:51:14 PM