JVC GET0643-001A - Manual (Page 20)

ENGLISH
20
Selecting a track from the menu
1
Enter the main menu.
2
Select the desired menu.
Listening to the iPod/iPhone
You can connect the iPod/iPhone using the following cable or adapter:
Cable/adapter To operate
USB 2.0 cable (supplied with the iPod/iPhone) to the
USB input jack on the control panel See “When connected with the USB cable” below.
Interface adapter for iPod, KS-PD100 (not supplied) to
the CD changer jack on the rear of the unit See “When connected with the interface adapter” on
page 21.
• Disconnecting the iPod/iPhone will stop playback. Press SRC to listen to another playback source.
• For details, refer also to the manual supplied with your iPod/iPhone.
Caution:
• Avoid using the iPod/iPhone if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
When connected with the USB cable
There are 2 control terminals in “USB-IPOD” source.
• “HEAD MODE”: control by this unit.
• “IPOD MODE”: control by the connected iPod/iPhone.
Preparation: Select the controlling terminal, “ HEAD MODE” or “IPOD MODE” for iPod playback:
• Press and hold BACK button.
• Make the selection from “
IPOD SWITCH” setting, see page 29.
The operations explained below are under “ HEAD MODE.”
1 Select “USB-IPOD.”
Playback starts automatically.
2 Select a song.
[Turn]
=
[Press]
PLAYLISTS Ô ARTISTS Ô ALBUMS Ô
SONGS Ô PODCASTS Ô GENRES Ô
COMPOSERS Ô AUDIOBOOKS
3
Select the desired track.
• To return to the previous menu, press BACK.
[Turn] = [Press]
EN20-25_KD-S36[J]_1.indd 20 EN20-25_KD-S36[J]_1.indd 20 8/7/09 1:51:29 PM 8/7/09 1:51:29 PM