Jackson Chemical Sanatizing Singal and Dual Rack Upright Door Dishmachines CONSERVER XL2-CML - Manual (Page 69)

Conserver XL Series Technical Manual 7610-002-10-23
Issued: 11-28-2007 Revised: N/A
SECTION 5: PARTS SECTION
CML ASSEMBLY OPTIONS (CONTINUED)
62
ITEM QTY DESCRIPTION Mfg. No.
1 1 Front Door Assembly 05700-003-01-62
1 Front Door 05700-003-01-61
2 Door Glides UHMW 05700-111-33-59
2 1 Inner Door Guide 05700-002-07-21
3 1 Cantilever Arm Assembly 05700-002-07-69
1 Cantilever Arm Weldment 05700-002-09-14
2 Plug 05340-011-35-00
2 Spring Pin, 1/4" Dia. X 1 1/8" Long 05315-407-06-00
2 Yoke Assembly 05700-000-75-77
4 1 Hinge, Slotted 05700-002-07-39
5 2 Front Door Bracket 05700-002-07-37
6 1 Tub Weldment 05700-002-72-64
7 1 Hood Weldment 05700-002-72-67
8 1 Frame Weldment 05700-002-61-22
9 1 Right Door Assembly 05700-002-08-63
1 Right Door Weldment 05700-002-08-61
2 Door Glides UHMW 05700-111-33-59
1 Magnet, Reed Switch 05930-111-51-68
2 Locknut, 8-32 Hex, with Nylon Insert 05310-272-02-00
10 2 Front Door Guide 05700-021-44-94
11 1 Bracket, Side Door Connecting 05700-002-07-33
12 1 Right Rear Door Guide 05700-021-84-70
A Yoke Assembly 05700-000-75-77
13 1 Yoke 05700-000-75-78
14 1 Pin, Clevis 5/16" x 1 3/8" 05315-700-01-00
15 2 Washer, Nylon 05311-369-03-00
16 1 Bushing 03120-100-03-00
17 1 Cotter Pin, 3/32" x 3/4" 05315-207-01-00
18 1 Nut, 3/8"-16 S/S, Center Locknut 05310-256-04-00
19 1 Chemical Feed Tube Weldment 05700-002-08-14
1 Gasket, Chemical Feed Tube 05700-011-45-36
1 Bushing, 3/4” Hole Snap 05975-002-47-54
20 1 Control Box Assembly N/A
21 2 Spring Rod 05700-001-28-18
22 2 Spring 05340-109-02-00
23 2 Bolt, Hanger Eye 05306-956-05-00
24 2 Washer, Impeller 05311-176-02-00
25 4 Nut, Hex 3/8"-16 S/S 05310-276-01-00
Rack Rail Assembly 05700-002-08-64
26 1 Rack Rail Weldment 05700-002-07-65
27 3 Locknut, 10-24 Hex, S/S, with Nylon Insert 05310-373-01-00
28 3 Screw, 10-24 x 1/2" Long S/S 05305-173-18-00
29 1 Guard, Front Track 05700-002-07-44
* Represents an item not shown.