Jasco RM25001 User Manual
Page 3
5
4
1. ON-OFFTurns product On or Off.
2. TV, VCR, DVD, etc. Selects product to be operated.
Lights up in green to indicated what mode you’re in.
3. SETUP Used for setting up your remote.
4. CC TV Closed Caption (if your TV has this feature)
or DVD Subtitle toggle. GUIDE (after pressing
SHIFT) brings up the DVD Title Menu screen.
Displays on-screen program guide.
5. SHIFT Press and release to access buttons labeled in
blue (indicator stays on). Press again to exit Shift mode.
6. VOLUME UP/DOWN Changes the volume level of
the product, normally the TV.
7. INFO Displays on-screen channel information, etc.
MENU brings up the DVD disc Menu screen (after
pressing SHIFT) - use with the UP, DOWN, LEFT &
RIGHT navigation buttons (i.e. Vol/Ch buttons).
8. PIP TV Picture-in- Picture control.
9. SWAP Swaps TV PIP screens.
10. SLEEP Turns off the TV after a period of 1 to 99 minutes.
11. RECORD, PLAY, STOP, REW, FF, PAUSE VCR control
buttons operate your VCR even when the remote is set to
operate the TV. Also operates DVD Scan -/+.
12. ENTER Used after direct channel number entry to
immediately change to the selected channel.
13. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
14. MOVE Moves the position of the PIP screen.
15. PREV CH Returns to the previously selected
channel, or DVD repeat toggle. EXIT (after pressing
SHIFT) Exits On-Screen Menus and/or Returns to
previous On-Screen selection.
16. MUTE Turns off the TV sound while the picture
remains. OK (after pressing SHIFT) Selects menu
items for the device you are controlling.
17. CHANNEL UP/DOWN Changes the channels. Also,
CHAPTER +/- controls DVD/CD track selection i.e.
DVD/CD Track Skip Up/Down (in DVD and SAT
modes). Note the VCR buttons also control DVD
when in DVD Mode.
18. INPUT For some TVs, press repeatedly to select from
available viewing sources (antenna, cable, VCR, etc.).
19. LEARN Used to setup learning functions.
20. BACKLIGHT Press to turn the Blue Electrolumines-
cent Backlight feature on. After this, any time you
press any key, the backlighting illuminates the keys
and stays on for 5 seconds after removal of your
last keypress. (You never need to press the back-
light key again). But if you do, it turns the Backlight
feature off, which saves battery life. Backlight is
automatically turned off during setup.
Button Functions, cont.
Button Functions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
20.
19.
18.
17.
16.
15.
14.
13.
12.
11.
Note: The REC button must be pressed TWICE to record
from your VCR. For some brands of VCRs, you might need to
press the REC button once, then press it again for three
seconds. Some buttons on the remote might have functions
that are referred to by different names on the device you are
controlling. E.G. PREV.CHAN may be called RECALL, or
ENTER may be called DISPLAY. These differences depend on
the brand and model of your product. Also, this remote can
only operate features that exist on your product. E.G., your
product must have PREV.CHAN ability for the PREV.CHAN
button to operate this feature.