JVC TM-2001U - Manual (Page 21)

TM-2001U
TM-2701SU
21
Button Functions
41
DVD Buttons
VCR Buttons
TV/CATV Switch
VCR/DVD Switch
You can also use this remote control to operate the basic functions of your DVD player. These functions
include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power
off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 18.
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate
the television’s built-in tuner. Move the switch to CATV to operate a cable box.
• See page 16 for information on programming your remote for cable box operation.
You can control a VCR or DVD player with the buttons on the lower part of the remote control. Use the
VCR/DVD selector switch to choose either VCR or DVD operation.
• See pages 17 and 18 for information on programming your remote with VCR and DVD
operating codes.
You can use this remote control to operate the basic functions of your VCR. These functions include: play,
record, rewind, fast-forward, stop, pause, channel scan, TV / VCR, power on, and power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s
brand VCR, please see the code chart and instructions on page 17.
Button Functions
40
The R ETURN + button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels.
R ETURN + and hold for three seconds
Scan using the C HANNEL +/- buttons
R ETURN +
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the R ETURN + button for three seconds. The message
“RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with C
HANNEL +/-. Pressing any number key will cancel Return+.
Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124,
press100+, 2 (two), 4 (four).
RETURN CHANNEL
PROGRAMMED !
100+ Button
Return+
Input
Selects the signal input source for the television: TV, for Antenna or Cable; Video 1; or Video 2, for
video devices like VCRs, DVD players, or camcorders.
I NPUT
TV VIDEO-1 VIDEO-2