JVC TM-2001U - Manual (Page 4)

TM-2001U TM-2701SU 4
ON TIMER MENU OPERATE CHANNEL VOLUME POWER VIDEO L MONO INPUT 2 AUDIO R
POWER
DISPLAY
SLEEP TIMER
VIDEO STATUS
INPUT
1
7
4
100+
3
9
6
RETURN+
MUTING
MENU
V CHIP
EXIT
2
8
0
5
+ CH
VOL VOL +
CH
REC STOP PAUSE
PLAY FF REW
TV CATV DVD VCR
VCR CHANNEL TV/VCR VCR/ DVD POWER PREV NEXT
OPEN/CLOSE STILL/PAUSE
RM-C306
HYPER SURROUND
TV
Two AA
Batteries 1 Television
1 Remote
Control
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television,
please check to make sure you have all of the following items. In addition to this guide, your television
box should include:
Once you have unpacked your television, the next step is to connect it to your antenna/cable or
satellite system and to connect the audio/video devices you want to use with your television. To
make these connections you will use plugs like the ones illustrated below.
A/V Input Plug RF Connectors
Used to connect a
coaxial cable from an
external antenna or
Cable TV system.
A matching TV stand for
the TM-2701SU is also
available (sold separately).
Note: Your television
and/or remote control may
differ from the examples
illustrated here.
Used to make video
connections with
some VCRs, DVDs,
Camcorders, etc.
Used to connect
audio/video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
S-Video Plug
(TM-2701SU only)
We recommend that before you start using your new television, you read this entire User’s Guide so
you can learn about your new television’s many great features. But if you’re anxious to start using
your television right away, a quick setup guide follows on the next three pages.
Unpacking Your Television
6
IN
OUT
BNC connection box
7
Raise the latch on the remote’s back cover, or push down on the back cover and slide the cover
towards the bottom of the remote control to remove. Insert two batteries carefully noting the “+” and
“–” markings, placing the “–” end in the unit first. Slide or snap the cover back into place.
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you need
to begin using your new television right away. This information includes basic instructions on
operating your remote control, making a simple cable/antenna and optional VCR connection and,
finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult the
other detailed sections of this guide.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you can
operate your remote control, you first need to install the batteries (included).
Basic Operation
Turn the television on and off by pressing the P OWER button at the top right corner of the remote.
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available channels.
The right and left buttons will turn the volume up or down. These buttons are also marked with four
arrows and are also used with JVC's onscreen menu system. You will need to use these buttons
later in the Quick Setup.
The next step is to connect your television to an antenna or cable.
POWER MUTING
MENU
V CHIP
EXIT
+
CH
VOL VOL
+
CH
Remote Power
Button
Remote Key Feature Buttons
☞
Proceed to Step Two
Quick Setup 1