Jensen SMPS-225 - Manual (Page 6)

5
POWER SOURCE
This unit operates on battery or AC power.
AC adaptor
Input: 120V AC~ 60Hz
Output: 5V DC - 1A (not included)
Batteries 4x DC 1.5V “AAA” (UM-4) Batteries (rechargeable/non-rechargeable) –
Batteries not included
The unit will automatically disconnect the batteries to conserve battery power when the AC
Adaptor (not included) is plugged in.
Power installation
1. For AC power, insert the AC adaptor plug into DC Jack located on the back of the speaker.
2. For DC power, remove the battery
compartment cover. Observe the
polarity markings inside the
compartment and correctly insert 4 x
“AAA” (UM-4) batteries (not included).
Replace the compartment cover.
Warning
1. Make sure that the batteries are installed correctly. Wrong polarity may damage the unit.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard or rechargeable batteries.
4. Only batteries of the same or equivalent type as recommend are to be used.
5. If the unit is not to be used for an extended period of time, remove the battery.
6. Do not dispose of batteries in fire, batteries may explode or leak.
7. Replace the batteries when the unit stops operating properly.
8. Remove exhausted batteries from the unit, dispose promptly and properly.
ACCESSORIES
Please see below items are included in the package:
1. SMPS-225 Stereo Speaker System
2. Carry Pouch
3. User Manual
4. Warranty Card