Jenn-Air 730-0165 - Manual (Page 15)

13
TO MATCH LIGHT THE GRILL
If the burner will not light after several attempts using the control knobs, the burner may
be lit with a match.
1. If you have already attempted to light the burner with the igniter, allow 5 minutes for
any accumulated gas to dissipate.
2. Insert a match into the lighting rod. Ignite the match and insert through the cooking
grids to the burner.
3. Press and turn the control knob to the “HI” setting. Continue pressing the control knob
until the burner ignites. The burner should light immediately.
4. If the burner does not light within 4 seconds, turn the knob to the “OFF” position, wait
5 minutes and try again.
WARNING
When lighting, keep your face and hands
as far away from the grill as possible.
CAUTION
When using a match to light the grill
make sure to use the attached lighting
rod.
Lighting Rod