JVC SR-VS20EK - Manual (Page 44)

44
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or as the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on
page 45.
A
When Using Your Video Recorder As The Source
Player ...
... connect its AV1 (L-1) IN/OUT connector to the
recording deck.
B When Using Your Video Recorder As The Recording
Deck ...
... connect its AV2 (L-2) IN/DECODER or AV1 (L-1)
IN/OUT connector to the source player.
C If Another Recorder Is Compatible With The Y/C
Signal ...
... connect your recorder 's AV1 (L-1) IN/OUT
connector to another recorder.
With C connection ...
● When using your recorder as the recording deck, set
"L-1 INPUT" to "S-VIDEO" and "L-2 SELECT" to "A/V"
(
੬
pg. 50).
● When using your recorder as the source player, set
"L-1 OUTPUT" to "S-VIDEO" (
੬
pg. 50).
SELECT DECK
2
Press VHS or DV.
● When using your recorder as the source player, set
"S-VHS/AUDIO OUT" to "VHS" or "DV", depending
on the deck being selected (
੬
pg. 51).
SET RECORDING DECK’S
INPUT MODE
3
Set to AUX. With this video recorder, press NUMBER
key "0" and/or PR to select “L-1” for the
AV1 (L-1) IN/OUT connector, or “L-2” for the AV2 (L-2)
IN/DECODER connector, depending on the connector
being used.
● When using the AV2 (L-2) IN/DECODER connector,
set "L-2 SELECT" to the appropriate mode.
(
੬
pg. 50)
SET EDIT MODE
(VHS DECK ONLY)
4
See "Picture Control" on page 37.
START SOURCE PLAYER
5
Engage its Play mode.
START RECORDING DECK
6
Engage its Record mode.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
NUMBER "0"
DV
VHS
ADVANCED OPERATIONS (cont.)
PR