JVC HR-DVS3EK - Manual (Page 71)

Masterpage:Right-Full-NoTitle0
71
Filename [DVS3EK_4-EN.fm]
Page 71 November 5, 2001 1:42 pm
DV MODE SET
* The default setting is bold in the table below.
8
SOUND MODE
12BIT
16BIT
Select the appropriate mode before recording on a Mini DV tape.
12BIT : Enables Audio Dubbing later.
16BIT : Audio Dubbing is impossible but the recorded sound quality is
higher than “12BIT”.
8
12BIT MODE
SOUND1
SOUND2
FULL SOUND
Select the appropriate mode when playing back an audio-dubbed Mini DV tape.
SOUND1 : Original recorded sound
SOUND2 : Audio-dubbed sound
FULL SOUND :Original recorded sound and Audio-dubbed sound
NOTES:
● When “12BIT MODE” is set to “FULL SOUND”, both the main and sub audio will be
audible for bilingual tapes.
● To select only the main audio or only the sub audio of bilingual tapes, set “12BIT MODE”
to “SOUND1”.
8
AUDIO REC
NICAM
MONO
Select the appropriate mode when recording the NICAM bilingual programmes.
NICAM : The NICAM audio programme will be recorded on the audio
track.
MONO : The Standard (monaural) audio programme will be recorded on
the audio track.
DVS3EK_1-EN.book Page 71 Monday, November 5, 2001 1:43 PM