JVC HR-DVS3EK - Manual (Page 76)

Filename [DVS3EK_4-EN.fm]
Masterpage:Left
76
Page 76 November 5, 2001 1:42 pm
SUBSIDIARY SETTINGS (cont.)
Set Stations (A)
Set station names that are registered in your recorder.
A
Select the item.
Press
rt w e
until the item you want begins blinking.
B
Access the Manual Channel Set screen.
Press OK twice.
C
Select the new station.
D
Switch the stations.
Press OK.
● The Confirmation screen appears.
● Repeat steps 1 – 4 as necessary.
E
Close the Confirmation screen.
Press MENU.
Set Stations (B)
Set station names other than the ones registered in your recorder.
A
Select the character for station name.
B
Enter the new character.
Press
rt
to cycle through the characters (A–Z, 0–9, –,
f
,
+,
I
(space) ) and stop when the desired character is
indicated, then press
e
to enter. Enter the remaining
characters the same way (maximum of 4). After entering
all characters, press OK.
● The Confirmation screen appears.
● If you make a mistake, press
w until the incorrect character
begins blinking. Then enter the correct character by pressing
rt .
C
Close the Confirmation screen.
Press MENU.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9,
–,
f , +, I (space) (maximum of 4).
Perform steps 1 and 2 of “Manual Channel Set” on page 74
to access the Confirmation screen before continuing.
Press
e
until the station
name (ID) begins blinking,
then press
rt
until the new
station’s name (ID) you want
to store begins blinking.
Registered station names
(
੬
pg. 78) appear as you
press
rt
.
Perform steps 1 and 2 of “Manual Channel Set” on page 74
to access the Confirmation screen and then perform steps 1
and 2 of “Set Stations (A)” in the left column before
continuing.
Press
e
until the first letter of
the station name begins
blinking.
DVS3EK_1-EN.book Page 76 Monday, November 5, 2001 1:43 PM