JayBird BLUETOOTH HEADPHONES JB200 - Manual (Page 7)

Charging your headset
Your JayBird Bluetooth ® Stereo Headset
is powered by a built-in rechargeable
battery. Before using your headset for
the fi rst time, you should fully charge
the battery.
1. Insert the headset into the Charger Dock as shown making sure
the left earpieces are pushed all the way into the charger slots (left
earpiece provides charging connection).
2. Plug the smaller connector of the USB Cable into the DC-IN port on
the back of the Charger Dock.
3. Plug the other end of the USB Cable into any open USB port on your
computer or into the USB port on the JayBird AC power adapter
(sold separately) and then plug the AC power adapter into an
outlet.
4. The LED indicator on the right earpiece will glow RED during the
charge cycle (about 2 hours to fully charge). The LED will turn OFF
when fully charged.
5. Remove headset from Charger Dock.
Note: When the battery needs to be recharged, the LED
indicator will alternate blue and red color every 5 seconds.
Adjusting the in-ear pieces for optimum fi t
You can rotate the adjustable in-ear buds 360° to achieve a diff erent fi t of the earpiece to the ear.
The default positions as shown are strongly recommended. 2 o’clock for the leftside earpiece and 10
o’clock for the right side earpiece.
2
E N G L I S H
CHARGE STATUS
INDICATOR