John Deere 5103E - Manual (Page 17)

Safety
DX,SERV –19–17FEB99–1/1
Practice Safe Maintenance
TS218
–UN–23AUG88
Understand service procedure before doing work. Keep
area clean and dry.
Never lubricate, service, or adjust machine while it is
moving. Keep hands, feet , and clothing from
power-driven parts. Disengage all power and operate
controls to relieve pressure. Lower equipment to the
ground. Stop the engine. Remove the key. Allow machine
to cool.
Securely support any machine elements that must be
raised for service work.
Keep all parts in good condition and properly installed. Fix
damage immediately. Replace worn or broken parts.
Remove any buildup of grease, oil, or debris.
On self-propelled equipment, disconnect battery ground
cable (-) before making adjustments on electrical systems
or welding on machine.
On towed implements, disconnect wiring harnesses from
tractor before servicing electrical system components or
welding on machine.
AG,OUO6035,70 –19–17MAY00–1/1
Service Tractor Safely
LV828
–UN–08AUG94
Do not service the tractor while it is in motion or while the
engine is running.
Tighten wheel hardware to correct torque as specified in
Wheels, Tyress and Tread section. Torque at intervals
shown in Break-In Period and Lubrication and
Maintenance sections, to ensure that wheel hardware
does not loosen.
Reinstall shields removed during service.
05-9
022607
PN=15